Hardware mold is used in industrial production, with a variety of presses and special tools installed on the pressure machine, through the pressure of metal materials to produce the required shape of parts or products, this special tool is collectively referred to as hardware mold. Today Xiaobian will introduce the content of hardware mold processing technology and process combination to you. Welcome to read!

The process nature of hardware mold processing:

(1) The blanking die separates the material along the closed or open profile. Such as blanking die, punching die, cutting die, incision die, cutting die, cutting die, etc.

(2) Bending die makes slab or other blank bend and deform along a straight line (bending line), so as to obtain a certain Angle and shape of the workpiece die.

(3) Deep drawing die is to make sheet blank into open hollow parts, or further change the shape and size of the die.

(4) Molding die is the blank or semi-finished workpiece according to the figure convex direct copy molding, and the material itself only produces local plastic deformation of the mold. Such as expansion die, shrinkable die, flaring die, undulating die, flanging die, shaping die, etc.

Hardware mold processing process combination:

(1) In one stroke of the press, only one stamping process die is completed in a single process die.

(2) The composite die has only one station, and two or more stamping processes can be completed at the same time in one stroke of the press.

(3) The progressive die (also known as continuous die) has two or more stations in the feeding direction of the blank. In one stroke of the press, the die of two or more stamping processes is completed successively at different stations.

Continuous die progressive die), the press in a stamping stroke, the use of ribbon stamping raw materials, the use of several different stations on a pair of molds, at the same time to complete the cold stamping die of multiple stamping processes. Each time the die is stamped, the material band moves at a fixed distance until the product is finished.

During the stamping process, the material strip always moves in one direction; The material belt inside the mold is cut off to two or more directions after the movement is called progressive die; Die internal material belt feeding is called automatic continuous die; The manipulator or other automation facilities are used for stamping the stamping die of different processes in the production chain. The workpiece stamping processing is rated to move the die with the die or parts, which is called the multi-station die.

Thank you for reading, the above is the introduction of the nature of the hardware mold processing technology and the combination of processes, part of the content from the network, for reference only. If you want to know more about the precision metal mold processing details, welcome to call for detailed inquiries, dedicated to your service.